What is an Inflatable Packer? They function as a tool to assist in the isolation of boreholes. For high-pressure injection in geotechnical applications, inflatable packers are employed to create leak-proof foundations inside rocks and other unstable terrain. In order to ensure the quality of foundations, they can also be used to test the bedrock. When consolidating grout to make it impermeable and for other consolidation tasks, inflatable packers are used to inject cement into the grout. tested with lugeons as well. RDS Engineering Manufacturing two type packer two variations 1. single packer – used for below packer injection 2. double packer- used for micropile injection Inflated with water, air, or nitrogen. Features of Inflatable Packers: • Available as single-packer or double-packer configurations. • Suitable for TAM Pipe grouting. • Single-packers are easily converted into double-packers. • Inflation Elements can easily be replaceable on site. • Inflation element length can be customized as per requirements. Our patented packers are available for: Inflatable packers come in diameters of 1′′–2′′, 2′′–3′′, 3′′–4′′, 3′′–6′′, 4′′–7′′, and 5′′–8′′. Lengths range from 12′′ to at least five feet. They may expand by two times from their run-in diameter thanks to the sliding head design, and they often provide a longer seal than a mechanical packer. These packers contain built-in tube scrapers that operate each time the packer is deflated and remove extra grout that has clung to the exterior of the centre tube. Choose the right packer Dia 28MM OD Minimum Bore Hole Diameter 35MM Maximum Bore Hole Diameter 50MM Inner Tube Diameter 16MM Connection Port 3/8" BSP Inflation Port M6 x 6OD Dia 32MM OD Minimum Bore Hole Diameter 35MM Maximum Bore Hole Diameter 50MM Inner Tube Diameter 16MM Connection Port 3/8" BSP Inflation Port M6 x 6OD Dia 38MM OD Minimum Bore Hole Diameter 42MM Maximum Bore Hole Diameter 60MM Inner Tube Diameter 20MM Connection Port 1/2" BSP Inflation Port M6 x 6OD Dia 44MM OD Minimum Bore Hole Diameter 50MM Maximum Bore Hole Diameter 80MM Inner Tube Diameter 20MM Connection Port 1/2"BSP Inflation Port 1/8"BSP x 6OD Dia 56MM OD Minimum Bore Hole Diameter 60MM Maximum Bore Hole Diameter 90MM Inner Tube Diameter 27MM Connection Port 3/4"BSP Inflation Port 1/8"BSP x 6OD Dia 74MM OD Minimum Bore Hole Diameter 80MM Maximum Bore Hole Diameter 120MM Inner Tube Diameter 27MM Connection Port 3/4"BSP Inflation Port 1/8"BSP x 6OD Dia 84MM OD Minimum Bore Hole Diameter 90MM Maximum Bore Hole Diameter 130MM Inner Tube Diameter 27MM Connection Port 3/4"BSP Inflation Port 1/8"BSP x 6OD Dia 102MM OD Minimum Bore Hole Diameter 110MM Maximum Bore Hole Diameter 180MM Inner Tube Diameter 35MM Connection Port 1"BSP Inflation Port 1/8"BSP x 6OD Dia 130MM OD Minimum Bore Hole Diameter 140MM Maximum Bore Hole Diameter 230MM Inner Tube Diameter 35MM Connection Port 1"BSP Inflation Port 1/8"BSP x 6OD Dia 170MM OD Minimum Bore Hole Diameter 180MM Maximum Bore Hole Diameter 320MM Inner Tube Diameter 35MM Connection Port 1"BSP Inflation Port 1/8"BSP x 6OD We utilise an equipment called a packer to isolate boreholes. For various sectors, like tunnelling, mining, the oil and gas industry, etc., borehole isolation is essential and advantageous. They aid in isolating the annulus in the oil and gas industry between the tubing/casing and the production well. They provide corrosion protection for the tubing and casing. They assist us with well completion operations including cementing, fracturing, and acidizing. They are used for hydraulic fracturing in the mining industry. They are used for evaluating permeability. They are employed in solution mining. Pressurised cement grouting is used in tunnelling. The TAM Grouting. FAQ Terms and Conditions of Ordering: Quality warranty: Our products are made of high-quality steel, and all spare parts are inspected strictly before shipping. We have quickly responded to your complaint and suggestion. Production time: Generally, you need 2 days Transportation: By air, By express, or by sea, according to your requests. 1. Methods of Payment: RTGST, NEFT, IMPS, CASH, Online 2. Handling time for an order Based on order quantity, it normally takes 2 days for production. in 3 working days after receiving the advance payment 3. Shipping way Sample order: we suggest Courier express like DHL, UPS, TNT/FEDEX or by air Bulk order: we suggest by air or by sea. 4. Quality Control We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 5. After Services: a. Our sales team will respond to your question within 24 hours (Holidays Excluded) b. Technical Support will be available in any time 6. Quality and Service: A. There will be strict inspection and testing for every order before shipping out. B. Our sales team and Technical Support will respond to your question within 24 hours through WhatsApp +91 7600898210 C. A free replacement will be provided once the failure is confirmed to be caused by our product quality or if you are not satisfied with a refund. For more information, please contact: RDS Drilling Rig WhatsApp: +91 7600898210 Email: rdsdrillingrig@gmail.com

Equipment for Standard Penetration Split Barrel Soil Sampler SPT Sampler Split Spoon SPT Sampler Split Spoon Sampler Standard Penetration Test (SPT) Standard Penetration Test Sampler Standard Penetration Test (SPT) Sampler for Geotechnical Sampling, Split Tube Sampler to perform the Standard Penetration Test (SPT) by BS 1377: Part 9: 1990. Working together are an Auto Trip Hammer, SPT Drive Rods, and a Split Tube Sampler. SPT: STANDARD PENETRATION TEST The Standard Penetration Test is used to determine the engineering characteristics of soil layers and soil stratification. Split barrel samplers were employed to collect disturbed and undisturbed samples during the SPT, which were then put through additional laboratory tests. For identification purposes and for laboratory tests that permit the use of disturbed samples, the in-situ penetration test delivers a soil sample. The method of sampling soil entails using a split barrel sampler to collect a representative, disturbed model and test the subsoil's resistance to standard sampler penetration at the same time. The amount of blows necessary to drive a steel tube with specific dimensions into the subsoil to a specific depth with a hammer of specific weight (mass) is how many times the resistance to penetration is measured. A boring log data sheet must contain all relevant sample data, penetration resistance, and borehole data. Reporting should include the depths at the top and bottom of each 150-mm segment of sampler penetration as well as the number of blows necessary to impact that segment of penetration. The following crucial procedures are taken in collecting the data from the SPT, N value: ­ preliminary test ­ number of blows for the sampler penetration range of 0 to 150 mm; ­ actual test ­ number of blows for the sampler penetration range of 150 to 300 mm and 300 to 450 mm. An automatic hydraulic SPT device was installed on the drill mast side for simple placement over the SPT rods. Drop stroke of 760 mm, drop weight of 65 kg, and control panel display of blows. Description of goods: For performing the Standard Penetration Test (SPT), use the SPT Split Tube Sampler. We produce it in compliance with BS 1377: Part 9: 1990. A complete set of SPT samplers includes a Top ball valve Adaptor, two Split Spoons, and an open SPT Shoe. There are basket retainers made of steel and plastic. When the sampler is removed from the borehole, the ball valve adaptor prevents the sample from being washed out of the sampler. There are other options for a 60-degree nose cone and a long solid rod with a 60-degree point. The type of drill rods used to drive the sampler will determine the screw connection on the top adaptor, however, 1.1/2" BW or AW Rod is most typically utilised. Specifications: The dimensions of the typical split tube sampler are 2" (50.8 mm) OD x 1.3/8" (34.9 mm) ID x 18" (457 mm) or 24" (610 mm) length. Under difficult driving circumstances, the Heavy-duty FAQ Terms & Conditions of Ordering: Quality warranty: Our products are made of high-quality steel and all spares’ parts are inspected strictly before shipping. We have quickly responses for your complaint and suggestion. Production time: Generally need 2 days Transportation: By air, By Express or by sea according to your requests. 1. Methods of Payment: RTGST, NEFT, IMPS, CASH, Online 2. Handling time for an order Based on order quantity, normally it takes 2 days for production. in 3 working days after receiving the advance payment 3. Shipping way Sample order: we suggest Courier express like DHL/UPS/TNT/FEDEX or by air Bulk order: we suggest by air or by sea. 4. Quality Control We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 5. After Services: a. Our sales team will response for your question within 24 hours (Holidays Excluded) b. Technical Support will be available in any time 6. Quality & Service: A. There will be strict inspection and testing for every order before shipping out. B. Our sales team and Technical Support will response for your question within 24 hours through WhatsApp +91 7600898210 C. Free replacement will provide once the failure confirmed caused or our product quality; Not satisfied with a refund. For more information, please contact: RDS Drilling Rig. WhatsApp: +91 7600898210 Email: rdsdrillingrig@gmail.com Website: https://www.rdsrig.com

The core lifter, also known as the core catcher, is responsible for keeping the core inside the barrel and retaining it during wedge action. Core lifters from RDS Engineering are made of spring steel that has been suitably treated to add more spring action for a longer lifespan. To break the core sample, a core lifter case is required. The core lifter's tapered inside prevents it from sliding and allows it to grip onto the core sample. The core is kept inside the barrel using a core lifter or core catcher. Our core lifters are constructed from premium steel that has been precisely hardened for improved performance and longer life. Three essential components make up the core lifter assembly, which enables you to securely grasp the core sample and break it to bring it to the surface. Using the same source for all three pieces will assure optimal performance and provide the right distance between the core lifter, core lifter casing, and stop ring. FAQ Terms and Conditions of Ordering: Quality warranty: Our products are made of high-quality steel, and all spare parts are inspected strictly before shipping. We have quickly responded to your complaint and suggestion. Production time: Generally, you need 2 days Transportation: By air, By express, or by sea, according to your requests. 1. Methods of Payment: RTGST, NEFT, IMPS, CASH, Online 2. Handling time for an order Based on order quantity, it normally takes 2 days for production. in 3 working days after receiving the advance payment 3. Shipping way Sample order: we suggest Courier express like DHL, UPS, TNT/FEDEX or by air Bulk order: we suggest by air or by sea. 4. Quality Control We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 5. After Services: a. Our sales team will respond to your question within 24 hours (Holidays Excluded) b. Technical Support will be available in any time 6. Quality and Service: A. There will be strict inspection and testing for every order before shipping out. B. Our sales team and Technical Support will respond to your question within 24 hours through WhatsApp +91 7600898210 C. A free replacement will be provided once the failure is confirmed to be caused by our product quality or if you are not satisfied with a refund. For more information, please contact: RDS Drilling Rig WhatsApp: +91 7600898210 Email: rdsdrillingrig@gmail.com

The core is kept inside the barrel using a core lifter or core catcher. Our core lifters are constructed from premium steel that has been precisely hardened for improved performance and longer life. To break the core sample, a core lifter case is required. The core lifter's tapered inside prevents it from sliding and allows it to grip onto the core sample. The core lifter, also known as the core catcher, is responsible for keeping the core inside the barrel and retaining it during wedge action. Core lifters from RDS Engineering are made of spring steel that has been suitably treated to add more spring action for a longer lifespan. Three essential components make up the core lifter assembly, which enables you to securely grasp the core sample and break it to bring it to the surface. Using the same source for all three pieces will assure optimal performance and provide the right distance between the core lifter, core lifter casing, and stop ring. FAQ Terms and Conditions of Ordering: Quality warranty: Our products are made of high-quality steel, and all spare parts are inspected strictly before shipping. We have quickly responded to your complaint and suggestion. Production time: Generally, you need 2 days Transportation: By air, By express, or by sea, according to your requests. 1. Methods of Payment: RTGST, NEFT, IMPS, CASH, Online 2. Handling time for an order Based on order quantity, it normally takes 2 days for production. in 3 working days after receiving the advance payment 3. Shipping way Sample order: we suggest Courier express like DHL, UPS, TNT/FEDEX or by air Bulk order: we suggest by air or by sea. 4. Quality Control We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 5. After Services: a. Our sales team will respond to your question within 24 hours (Holidays Excluded) b. Technical Support will be available in any time 6. Quality and Service: A. There will be strict inspection and testing for every order before shipping out. B. Our sales team and Technical Support will respond to your question within 24 hours through WhatsApp +91 7600898210 C. A free replacement will be provided once the failure is confirmed to be caused by our product quality or if you are not satisfied with a refund. For more information, please contact: RDS Drilling Rig WhatsApp: +91 7600898210 Email: rdsdrillingrig@gmail.com

RDS Engineering manufactures diamond Reaming shells for NMLC triple tube for Diamond Core Drilling, Tunnel Drilling, Geotechnical Investigation, Soil Testing, Drainage, and Grouting of Holes, among other uses. The reaming shell, which is immediately above the diamond core bit, keeps the drill hole's outer diameter constant. The diamond core bit is joined to the core barrel by the diamond reaming shell. The reaming shell effectively reams the hole because its outer diameter is only a little bit larger than the core bits. The reaming shell serves as a link between the core bit and the outer barrel and is a crucial component of a diamond drilling system. In addition to stabilizing the drill string's bottom, it reams the hole to the right size. The drilling crew should regularly inspect the reaming shell's outer diameter since a worn-out or smaller reaming shell will cause the drill bit and drill string to become stuck. RDS manufactures great-quality synthetic and natural diamonds that are placed in a matrix with great resistance and is used to create reaming shells. On the leading edges of the ring, friction-resistant tungsten carbide inlays offer extra security and a longer lifespan. Diamond reaming shell for NMLC triple size core diameter of 48 mm and a Drilling hole diameter of 76 mm. FAQ Terms and Conditions of Ordering: Quality warranty: Our products are made of high-quality steel, and all spare parts are inspected strictly before shipping. We have quickly responded to your complaint and suggestion. Production time: Generally, you need 2 days Transportation: By air, By express, or by sea, according to your requests. 1. Methods of Payment: RTGST, NEFT, IMPS, CASH, Online 2. Handling time for an order Based on order quantity, it normally takes 2 days for production. in 3 working days after receiving the advance payment 3. Shipping way Sample order: we suggest Courier express like DHL, UPS, TNT/FEDEX or by air Bulk order: we suggest by air or by sea. 4. Quality Control We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 5. After Services: a. Our sales team will respond to your question within 24 hours (Holidays Excluded) b. Technical Support will be available in any time 6. Quality and Service: A. There will be strict inspection and testing for every order before shipping out. B. Our sales team and Technical Support will respond to your question within 24 hours through WhatsApp +91 7600898210 C. A free replacement will be provided once the failure is confirmed to be caused by our product quality or if you are not satisfied with a refund. For more information, please contact: RDS Drilling Rig WhatsApp: +91 7600898210 Email: rdsdrillingrig@gmail.com

RDS Engineering manufactures diamond core Reaming shells for Diamond Core Drilling, Tunnel Drilling, Geotechnical Investigation, Soil Testing, Drainage, and Grouting of Holes, among other uses. The reaming shell, which is immediately above the diamond core bit, keeps the drill hole's outer diameter constant. The diamond core bit is joined to the core barrel by the diamond reaming shell. The reaming shell effectively reams the hole because its outer diameter is only a little bit larger than the core bits. The reaming shell serves as a link between the core bit and the outer barrel and is a crucial component of a diamond drilling system. In addition to stabilizing the drill string's bottom, it reams the hole to the right size. The drilling crew should regularly inspect the reaming shell's outer diameter since a worn-out or smaller reaming shell will cause the drill bit and drill string to become stuck. RDS manufactures great-quality synthetic and natural diamonds that are placed in a matrix with great resistance and is used to create reaming shells. On the leading edges of the ring, friction-resistant tungsten carbide inlays offer extra security and a longer lifespan. Diamond reaming shell for Nx duble tube size core diameter of 54 mm and a Drilling hole diameter of 76 mm. FAQ Terms and Conditions of Ordering: Quality warranty: Our products are made of high-quality steel, and all spare parts are inspected strictly before shipping. We have quickly responded to your complaint and suggestion. Production time: Generally, you need 2 days Transportation: By air, By express, or by sea, according to your requests. 1. Methods of Payment: RTGST, NEFT, IMPS, CASH, Online 2. Handling time for an order Based on order quantity, it normally takes 2 days for production. in 3 working days after receiving the advance payment 3. Shipping way Sample order: we suggest Courier express like DHL, UPS, TNT/FEDEX or by air Bulk order: we suggest by air or by sea. 4. Quality Control We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 5. After Services: a. Our sales team will respond to your question within 24 hours (Holidays Excluded) b. Technical Support will be available in any time 6. Quality and Service: A. There will be strict inspection and testing for every order before shipping out. B. Our sales team and Technical Support will respond to your question within 24 hours through WhatsApp +91 7600898210 C. A free replacement will be provided once the failure is confirmed to be caused by our product quality or if you are not satisfied with a refund. For more information, please contact: RDS Drilling Rig WhatsApp: +91 7600898210 Email: rdsdrillingrig@gmail.com

The reaming shell serves as a link between the core bit and the outer barrel and is a crucial component of a diamond drilling system. In addition to stabilizing the drill string's bottom, it reams the hole to the right size. RDS Engineering manufactures diamond core Reaming shells for Diamond Core Drilling, Tunnel Drilling, Geotechnical Investigation, Soil Testing, Drainage, and Grouting of Holes, among other uses. The reaming shell, which is immediately above the diamond core bit, keeps the drill hole's outer diameter constant. The diamond core bit is joined to the core barrel by the diamond reaming shell. The reaming shell effectively reams the hole because its outer diameter is only a little bit larger than the core bits. The drilling crew should regularly inspect the reaming shell's outer diameter since a worn-out or smaller reaming shell will cause the drill bit and drill string to become stuck. RDS manufactures great-quality synthetic and natural diamonds that are placed in a matrix with great resistance and is used to create reaming shells. On the leading edges of the ring, friction-resistant tungsten carbide inlays offer extra security and a longer lifespan. Diamond reaming shell for Nx Single tube size core diameter of 54 mm and a Drilling hole diameter of 76 mm. FAQ Terms and Conditions of Ordering: Quality warranty: Our products are made of high-quality steel, and all spare parts are inspected strictly before shipping. We have quickly responded to your complaint and suggestion. Production time: Generally, you need 2 days Transportation: By air, By express, or by sea, according to your requests. 1. Methods of Payment: RTGST, NEFT, IMPS, CASH, Online 2. Handling time for an order Based on order quantity, it normally takes 2 days for production. in 3 working days after receiving the advance payment 3. Shipping way Sample order: we suggest Courier express like DHL, UPS, TNT/FEDEX or by air Bulk order: we suggest by air or by sea. 4. Quality Control We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 5. After Services: a. Our sales team will respond to your question within 24 hours (Holidays Excluded) b. Technical Support will be available in any time 6. Quality and Service: A. There will be strict inspection and testing for every order before shipping out. B. Our sales team and Technical Support will respond to your question within 24 hours through WhatsApp +91 7600898210 C. A free replacement will be provided once the failure is confirmed to be caused by our product quality or if you are not satisfied with a refund. For more information, please contact: RDS Drilling Rig WhatsApp: +91 7600898210 Email: rdsdrillingrig@gmail.com

Equipment for undisturbed soil samples These sampling tubes can be used to gather undisturbed soil samples at various depths. All the tools needed for boring are included in the kit. collection and wax sealing. The procedure can be performed with or without a tripod support. The tools are included in a canvas bag. Models: 150mm, 200mm, 225mm, or 300mm in length, respectively. 1 meter long and 5 times 37.5 mm in diameter. Large jarring link for driving samplers with a 50mm, 100mm, or 150mm diameter. This can be attached to the extension rod or the sampler. The carrying case contains one eye hook, one wax container, one methylated spirit stove, one wax ladle, and one set of spanners. A 150-mm auger blade type, equipped with a T-shaped handle and a single, one-meter-long rod. Accessories: Samplers of various sizes are available for undisturbed sampling. These are used by sample equipment. Each 45-cm-long sampler comes with two end caps and a cutting nose. driving head with three air outlet valves. C-spanners Samplers come in 50mm, 100mm, and 150mm dia. Additionally, 50-mm, 75-mm, and 100-mm-diameter thin-walled samplers are readily accessible. Each sampler measures 60 centimeters in length and has a reinforced cutting edge. By employing the proper adaptors, these samplers can be utilized with sampling equipment, such as a" drill rod FAQ Terms & Conditions of Ordering: Quality warranty: Our products are made of high-quality steel and all spares’ parts are inspected strictly before shipping. We have quickly responses for your complaint and suggestion. Production time: Generally need 2 days Transportation: By air, By Express or by sea according to your requests. 1. Methods of Payment: RTGST, NEFT, IMPS, CASH, Online 2. Handling time for an order Based on order quantity, normally it takes 2 days for production. in 3 working days after receiving the advance payment 3. Shipping way Sample order: we suggest Courier express like DHL/UPS/TNT/FEDEX or by air Bulk order: we suggest by air or by sea. 4. Quality Control We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 5. After Services: a. Our sales team will response for your question within 24 hours (Holidays Excluded) b. Technical Support will be available in any time 6. Quality & Service: A. There will be strict inspection and testing for every order before shipping out. B. Our sales team and Technical Support will response for your question within 24 hours through WhatsApp +91 7600898210 C. Free replacement will provide once the failure confirmed caused or our product quality; Not satisfied with a refund. For more information, please contact: RDS Drilling Rig. WhatsApp: +91 7600898210 Email: rdsdrillingrig@gmail.com

Model: RDS-400 Trolley-Mounted Hydraulic Diamond Core Drilling Rig Application Use: Geotechnical, Mining Core Drilling, Water Wells, and Pilling (Multipurpose) Capacity: Maximum Depth: 400 Meters (Soil and Rock) Hole Diameter: 50mm to 600mm Drilling On: Any Type of Soil All Types of Hard rocks Like iron, granite, quartzite, bolder, etc. Power By: New Ashok Leyland Hino engine, 6-cylinder, 101 HP or Recondition with a 6-month warranty (Optional) Transmission: 5 forward gears 1 reverse gear (5F+1R) Vertical gearbox Rotary Head (PTO): Rotation By Gearbox and Two Hydraulic Motors variable speed: 50 to 600 RPM Max Torque: 500 Nm Water swivel: Stainless steel, hard chrome plated, replaceable bushing system Water pump: Centrifugal Pump: 2.5" x 3" Flow and TP-400 Triplex high-pressure piston mud pump: 80–400 LPM Hydraulic (6-month warranty) Feed: 1 Hydraulic Cylinder with auto-feed function Feed Force and Speed: Pull Up: 9500 kg/4000 psi, and Pull Up: 18 Meters/minute Pull Down: 7500 kg, and Pull Down: 22 Meters/minute Mast: 2 Hydraulic Cylinders Leveling: 4 Hydraulic cylinders; proper levelling drill points with a separate lever Manual 4-screw jack (Optional) Hydraulic Pump: Double Hydraulic Vane Pump Tank capacity: Hydraulic oil, 180 Liters Hydraulic Motor: 315 Hydraulic Motor with wire rope winch pully Control Box: Hydraulic Control valve with a separate microlever operational Easy to operate Structure, Safety and Extra Accessories Chassis: ISI Heavy 8” C channel structure Proper balanced Mounting: Trolley mounting with two MRF tyres Mast: 20-foot-long channel structure with ISI Heavy 3” C channel Box Type Drill Rod Handling: Rod Handling 10 feet, 3 meters Diesel tank: 40 Liters Safety: TPI Approve All part Safety Cover All Rotating parts safety grill Additional accessories Night Lights, Tools Box, Drill Rod stand, 36, 24 pipe wrench, Wire Rope Pana Set, foot valve, section pipe, Return and steel valve, Rig Dimension and Weight Length: 22 feet Width: 5 feet Height: 8 feet Weight: 4500 Kg Geotechnical Testing Equipment as per ISO 22476-3:2005 RDS Auto SPT Hammer Technical Specifications Hammer drop height: 760mm, 76cm Hammer piston weight: 63.5 Kg Blow per minute: 10-30 Adjustable System Energy Transfer Ratio ETR Test: 67%–75% Adjustable System SPT Assembly: SPT Sampler, SPT tube, SPT shoe SPT Anvil Connection: AW / Customize U.D.S Tube (Shelby Tube): Dimension Size: OD-73mm, ID-69mm, Length-600mm Dimension Size: OD-106mm, ID-100mm, Length-500mm Core Drilling Mining Equipment Core Barrel Support: Ax, Bx, Nx, Hx, PX, AQ, BQ, NQ, HQ, PQ, NMLC All Series Support Single, Double, and Triple Tube Core Barrel Support Casing Support: All Types of Casing Support Drill Rod: Aw, Bw, Nw, Nq All Types of Drill Rod Support RDS API Drill Rod: Special design for RDS-400 RDS API Drill Rod: Carbon steel seamless pipe, 60mm OD, 50mm ID, 5mm thickness, Weight 25 kg RDS API Drill Rod Adapter: En39 material Adapter With harness tampering, CNC Threading and 12 shaping parts