Equipment for Standard Penetration Split Barrel Soil Sampler SPT Sampler Split Spoon SPT Sampler Split Spoon Sampler Standard Penetration Test (SPT) Standard Penetration Test Sampler Standard Penetration Test (SPT) Sampler for Geotechnical Sampling, Split Tube Sampler to perform the Standard Penetration Test (SPT) by BS 1377: Part 9: 1990. Working together are an Auto Trip Hammer, SPT Drive Rods, and a Split Tube Sampler. SPT: STANDARD PENETRATION TEST The Standard Penetration Test is used to determine the engineering characteristics of soil layers and soil stratification. Split barrel samplers were employed to collect disturbed and undisturbed samples during the SPT, which were then put through additional laboratory tests. For identification purposes and for laboratory tests that permit the use of disturbed samples, the in-situ penetration test delivers a soil sample. The method of sampling soil entails using a split barrel sampler to collect a representative, disturbed model and test the subsoil's resistance to standard sampler penetration at the same time. The amount of blows necessary to drive a steel tube with specific dimensions into the subsoil to a specific depth with a hammer of specific weight (mass) is how many times the resistance to penetration is measured. A boring log data sheet must contain all relevant sample data, penetration resistance, and borehole data. Reporting should include the depths at the top and bottom of each 150-mm segment of sampler penetration as well as the number of blows necessary to impact that segment of penetration. The following crucial procedures are taken in collecting the data from the SPT, N value: ­ preliminary test ­ number of blows for the sampler penetration range of 0 to 150 mm; ­ actual test ­ number of blows for the sampler penetration range of 150 to 300 mm and 300 to 450 mm. An automatic hydraulic SPT device was installed on the drill mast side for simple placement over the SPT rods. Drop stroke of 760 mm, drop weight of 65 kg, and control panel display of blows. Description of goods: For performing the Standard Penetration Test (SPT), use the SPT Split Tube Sampler. We produce it in compliance with BS 1377: Part 9: 1990. A complete set of SPT samplers includes a Top ball valve Adaptor, two Split Spoons, and an open SPT Shoe. There are basket retainers made of steel and plastic. When the sampler is removed from the borehole, the ball valve adaptor prevents the sample from being washed out of the sampler. There are other options for a 60-degree nose cone and a long solid rod with a 60-degree point. The type of drill rods used to drive the sampler will determine the screw connection on the top adaptor, however, 1.1/2" BW or AW Rod is most typically utilised. Specifications: The dimensions of the typical split tube sampler are 2" (50.8 mm) OD x 1.3/8" (34.9 mm) ID x 18" (457 mm) or 24" (610 mm) length. Under difficult driving circumstances, the Heavy-duty FAQ Terms & Conditions of Ordering: Quality warranty: Our products are made of high-quality steel and all spares’ parts are inspected strictly before shipping. We have quickly responses for your complaint and suggestion. Production time: Generally need 2 days Transportation: By air, By Express or by sea according to your requests. 1. Methods of Payment: RTGST, NEFT, IMPS, CASH, Online 2. Handling time for an order Based on order quantity, normally it takes 2 days for production. in 3 working days after receiving the advance payment 3. Shipping way Sample order: we suggest Courier express like DHL/UPS/TNT/FEDEX or by air Bulk order: we suggest by air or by sea. 4. Quality Control We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 5. After Services: a. Our sales team will response for your question within 24 hours (Holidays Excluded) b. Technical Support will be available in any time 6. Quality & Service: A. There will be strict inspection and testing for every order before shipping out. B. Our sales team and Technical Support will response for your question within 24 hours through WhatsApp +91 7600898210 C. Free replacement will provide once the failure confirmed caused or our product quality; Not satisfied with a refund. For more information, please contact: RDS Drilling Rig. WhatsApp: +91 7600898210 Email: rdsdrillingrig@gmail.com Website: https://www.rdsrig.com

Auto SPT Hammer RDS Engineering Manufacturing Standard Penetration Test (SPT) drop hammer that is hydraulically powered and entirely automated. The hammer produces a reliable and precise blow count using a 140 lbs driving force (slug) dropped from 76 cm, 760mm Adjustable. Both a swing-arm mounted variant and a solo winch line device are offered for the hammer. Both designs may be used for practically any equipment. Compared to conventional manual SPT procedures, the fully enclosed, hydraulic motor powered hammer is far safer. The straightforward, durable design minimises maintenance while maintaining great efficiency. For all RDS rig variants as well as typical rival equipment, we provide mounting and hydraulic connection kits. According to ISO 22476-3:2005, the RDS automated SPT hammer delivers exceptionally reliable and accurate Standard Penetration Test results. There are no wires or ropes to obstruct the weight's free fall, and a viewing hole enables you to confirm the 30 inch fall height. All moving parts, including the region that is likely to be hit by the weight or anvil, are also encased for safety. RDS Engineering installs more than 80 Auto SPT Drilling Rigs. Geotechnical Testing Equipment as per ISO 22476-3:2005 RDS Auto SPT Hammer Technical Specifications Hammer drop height: 760mm, 76cm, 30 inches, Hammer piston weight: 63.5 Kg, 140 lbs Blow per minute: 10-30 Adjustable System Energy test ratio (ETR): 67% - 80% Adjustable System SPT Assembly: SPT Sampler, SPT tube, SPT shoe SPT Anvil Connection: AW / Customize SPT Automatic Hammer Benefits 1. Easy to Upgrade Your Existing Rig 2. Tests with high reliability and accuracy (63.5 kg x 760mm drop) (140 lbs. x 30" drop) 3. Safety: the hammer's casing contains all of the working parts. 4. Can be applied to the majority of rigs (geotechnical, rotary, diamond core rig) 5. Accuracy results in N-value and SPT test, SBC Test Easy to Set Up The SPT (Standard Penetration Test) Hammer assembly is kept to the right of the drill frame and secured in place for travel. The Hammer must be raised using a hydraulic cylinder or hoist and placed above the drill rod in order to work. The Hammer case is lowered into the driving position so that it may be rapidly positioned above the borehole. Simple to Use The Hammer's design is straightforward, and a single operator can operate it successfully. Insofar as their performance doesn't depend on operator-controlled adjustments or monitoring, RDS SPT Hammers are totally automated. The weight of the slug is raised hydraulically via a continuous chain; Due to the Hammer case's ability to "float" in the self-compensating rack or on the hydraulic cylinder, the sampling procedure may be followed regardless of the material density. For better safety, the hitting surface is kept totally enclosed. The normal penetration test is carried out by the RDS Self-Compensating SPT Hammer without adding any extra weight or pressure to the drill string. This eliminates the possibility of retroactive loads or forces being applied to the drill string each time the mechanism cycles. FAQ Terms & Conditions of Ordering: Quality warranty: Our products are made of high-quality steel and all spare parts are inspected strictly before shipping. We have quickly responded to your complaint and suggestion. Production time: Generally need 15 days Transportation: By air, By Express or by sea according to your requests. 1. Methods of Payment: RTGST, NEFT, IMPS, CASH, Online 2. Handling time for an order Based on order quantity, normally it takes 2 days for production. in 3 working days after receiving the advance payment 3. Shipping way Sample order: we suggest Courier express like DHL/UPS/TNT/FEDEX or by air Bulk order: we suggest by air or by sea. 4. Quality Control We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 5. After Services: a. Our sales team will respond to your question within 24 hours (Holidays Excluded) b. Technical Support will be available at any time 6. Quality & Service: A. There will be strict inspection and testing for every order before shipping out. B. Our sales team and Technical Support will respond to your question within 24 hours through WhatsApp at +91 7600898210 C. Free replacement will provide once the failure is confirmed caused or our product quality; Not satisfied with a refund. For more information, please contact: RDS Drilling Rig. WhatsApp: +91 7600898210 Email: rdsdrillingrig@gmail.com Website: https://www.rdsrig.com

RDS Engineering manufactures diamond Reaming shells for NMLC triple tube for Diamond Core Drilling, Tunnel Drilling, Geotechnical Investigation, Soil Testing, Drainage, and Grouting of Holes, among other uses. The reaming shell, which is immediately above the diamond core bit, keeps the drill hole's outer diameter constant. The diamond core bit is joined to the core barrel by the diamond reaming shell. The reaming shell effectively reams the hole because its outer diameter is only a little bit larger than the core bits. The reaming shell serves as a link between the core bit and the outer barrel and is a crucial component of a diamond drilling system. In addition to stabilizing the drill string's bottom, it reams the hole to the right size. The drilling crew should regularly inspect the reaming shell's outer diameter since a worn-out or smaller reaming shell will cause the drill bit and drill string to become stuck. RDS manufactures great-quality synthetic and natural diamonds that are placed in a matrix with great resistance and is used to create reaming shells. On the leading edges of the ring, friction-resistant tungsten carbide inlays offer extra security and a longer lifespan. Diamond reaming shell for NMLC triple size core diameter of 48 mm and a Drilling hole diameter of 76 mm. FAQ Terms and Conditions of Ordering: Quality warranty: Our products are made of high-quality steel, and all spare parts are inspected strictly before shipping. We have quickly responded to your complaint and suggestion. Production time: Generally, you need 2 days Transportation: By air, By express, or by sea, according to your requests. 1. Methods of Payment: RTGST, NEFT, IMPS, CASH, Online 2. Handling time for an order Based on order quantity, it normally takes 2 days for production. in 3 working days after receiving the advance payment 3. Shipping way Sample order: we suggest Courier express like DHL, UPS, TNT/FEDEX or by air Bulk order: we suggest by air or by sea. 4. Quality Control We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 5. After Services: a. Our sales team will respond to your question within 24 hours (Holidays Excluded) b. Technical Support will be available in any time 6. Quality and Service: A. There will be strict inspection and testing for every order before shipping out. B. Our sales team and Technical Support will respond to your question within 24 hours through WhatsApp +91 7600898210 C. A free replacement will be provided once the failure is confirmed to be caused by our product quality or if you are not satisfied with a refund. For more information, please contact: RDS Drilling Rig WhatsApp: +91 7600898210 Email: rdsdrillingrig@gmail.com

RDS Engineering manufactures diamond core Reaming shells for Diamond Core Drilling, Tunnel Drilling, Geotechnical Investigation, Soil Testing, Drainage, and Grouting of Holes, among other uses. The reaming shell, which is immediately above the diamond core bit, keeps the drill hole's outer diameter constant. The diamond core bit is joined to the core barrel by the diamond reaming shell. The reaming shell effectively reams the hole because its outer diameter is only a little bit larger than the core bits. The reaming shell serves as a link between the core bit and the outer barrel and is a crucial component of a diamond drilling system. In addition to stabilizing the drill string's bottom, it reams the hole to the right size. The drilling crew should regularly inspect the reaming shell's outer diameter since a worn-out or smaller reaming shell will cause the drill bit and drill string to become stuck. RDS manufactures great-quality synthetic and natural diamonds that are placed in a matrix with great resistance and is used to create reaming shells. On the leading edges of the ring, friction-resistant tungsten carbide inlays offer extra security and a longer lifespan. Diamond reaming shell for Nx duble tube size core diameter of 54 mm and a Drilling hole diameter of 76 mm. FAQ Terms and Conditions of Ordering: Quality warranty: Our products are made of high-quality steel, and all spare parts are inspected strictly before shipping. We have quickly responded to your complaint and suggestion. Production time: Generally, you need 2 days Transportation: By air, By express, or by sea, according to your requests. 1. Methods of Payment: RTGST, NEFT, IMPS, CASH, Online 2. Handling time for an order Based on order quantity, it normally takes 2 days for production. in 3 working days after receiving the advance payment 3. Shipping way Sample order: we suggest Courier express like DHL, UPS, TNT/FEDEX or by air Bulk order: we suggest by air or by sea. 4. Quality Control We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 5. After Services: a. Our sales team will respond to your question within 24 hours (Holidays Excluded) b. Technical Support will be available in any time 6. Quality and Service: A. There will be strict inspection and testing for every order before shipping out. B. Our sales team and Technical Support will respond to your question within 24 hours through WhatsApp +91 7600898210 C. A free replacement will be provided once the failure is confirmed to be caused by our product quality or if you are not satisfied with a refund. For more information, please contact: RDS Drilling Rig WhatsApp: +91 7600898210 Email: rdsdrillingrig@gmail.com

The reaming shell serves as a link between the core bit and the outer barrel and is a crucial component of a diamond drilling system. In addition to stabilizing the drill string's bottom, it reams the hole to the right size. RDS Engineering manufactures diamond core Reaming shells for Diamond Core Drilling, Tunnel Drilling, Geotechnical Investigation, Soil Testing, Drainage, and Grouting of Holes, among other uses. The reaming shell, which is immediately above the diamond core bit, keeps the drill hole's outer diameter constant. The diamond core bit is joined to the core barrel by the diamond reaming shell. The reaming shell effectively reams the hole because its outer diameter is only a little bit larger than the core bits. The drilling crew should regularly inspect the reaming shell's outer diameter since a worn-out or smaller reaming shell will cause the drill bit and drill string to become stuck. RDS manufactures great-quality synthetic and natural diamonds that are placed in a matrix with great resistance and is used to create reaming shells. On the leading edges of the ring, friction-resistant tungsten carbide inlays offer extra security and a longer lifespan. Diamond reaming shell for Nx Single tube size core diameter of 54 mm and a Drilling hole diameter of 76 mm. FAQ Terms and Conditions of Ordering: Quality warranty: Our products are made of high-quality steel, and all spare parts are inspected strictly before shipping. We have quickly responded to your complaint and suggestion. Production time: Generally, you need 2 days Transportation: By air, By express, or by sea, according to your requests. 1. Methods of Payment: RTGST, NEFT, IMPS, CASH, Online 2. Handling time for an order Based on order quantity, it normally takes 2 days for production. in 3 working days after receiving the advance payment 3. Shipping way Sample order: we suggest Courier express like DHL, UPS, TNT/FEDEX or by air Bulk order: we suggest by air or by sea. 4. Quality Control We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 5. After Services: a. Our sales team will respond to your question within 24 hours (Holidays Excluded) b. Technical Support will be available in any time 6. Quality and Service: A. There will be strict inspection and testing for every order before shipping out. B. Our sales team and Technical Support will respond to your question within 24 hours through WhatsApp +91 7600898210 C. A free replacement will be provided once the failure is confirmed to be caused by our product quality or if you are not satisfied with a refund. For more information, please contact: RDS Drilling Rig WhatsApp: +91 7600898210 Email: rdsdrillingrig@gmail.com