Equipment for Standard Penetration Split Barrel Soil Sampler SPT Sampler Split Spoon SPT Sampler Split Spoon Sampler Standard Penetration Test (SPT) Standard Penetration Test Sampler Standard Penetration Test (SPT) Sampler for Geotechnical Sampling, Split Tube Sampler to perform the Standard Penetration Test (SPT) by BS 1377: Part 9: 1990. Working together are an Auto Trip Hammer, SPT Drive Rods, and a Split Tube Sampler. SPT: STANDARD PENETRATION TEST The Standard Penetration Test is used to determine the engineering characteristics of soil layers and soil stratification. Split barrel samplers were employed to collect disturbed and undisturbed samples during the SPT, which were then put through additional laboratory tests. For identification purposes and for laboratory tests that permit the use of disturbed samples, the in-situ penetration test delivers a soil sample. The method of sampling soil entails using a split barrel sampler to collect a representative, disturbed model and test the subsoil's resistance to standard sampler penetration at the same time. The amount of blows necessary to drive a steel tube with specific dimensions into the subsoil to a specific depth with a hammer of specific weight (mass) is how many times the resistance to penetration is measured. A boring log data sheet must contain all relevant sample data, penetration resistance, and borehole data. Reporting should include the depths at the top and bottom of each 150-mm segment of sampler penetration as well as the number of blows necessary to impact that segment of penetration. The following crucial procedures are taken in collecting the data from the SPT, N value: ­ preliminary test ­ number of blows for the sampler penetration range of 0 to 150 mm; ­ actual test ­ number of blows for the sampler penetration range of 150 to 300 mm and 300 to 450 mm. An automatic hydraulic SPT device was installed on the drill mast side for simple placement over the SPT rods. Drop stroke of 760 mm, drop weight of 65 kg, and control panel display of blows. Description of goods: For performing the Standard Penetration Test (SPT), use the SPT Split Tube Sampler. We produce it in compliance with BS 1377: Part 9: 1990. A complete set of SPT samplers includes a Top ball valve Adaptor, two Split Spoons, and an open SPT Shoe. There are basket retainers made of steel and plastic. When the sampler is removed from the borehole, the ball valve adaptor prevents the sample from being washed out of the sampler. There are other options for a 60-degree nose cone and a long solid rod with a 60-degree point. The type of drill rods used to drive the sampler will determine the screw connection on the top adaptor, however, 1.1/2" BW or AW Rod is most typically utilised. Specifications: The dimensions of the typical split tube sampler are 2" (50.8 mm) OD x 1.3/8" (34.9 mm) ID x 18" (457 mm) or 24" (610 mm) length. Under difficult driving circumstances, the Heavy-duty FAQ Terms & Conditions of Ordering: Quality warranty: Our products are made of high-quality steel and all spares’ parts are inspected strictly before shipping. We have quickly responses for your complaint and suggestion. Production time: Generally need 2 days Transportation: By air, By Express or by sea according to your requests. 1. Methods of Payment: RTGST, NEFT, IMPS, CASH, Online 2. Handling time for an order Based on order quantity, normally it takes 2 days for production. in 3 working days after receiving the advance payment 3. Shipping way Sample order: we suggest Courier express like DHL/UPS/TNT/FEDEX or by air Bulk order: we suggest by air or by sea. 4. Quality Control We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 5. After Services: a. Our sales team will response for your question within 24 hours (Holidays Excluded) b. Technical Support will be available in any time 6. Quality & Service: A. There will be strict inspection and testing for every order before shipping out. B. Our sales team and Technical Support will response for your question within 24 hours through WhatsApp +91 7600898210 C. Free replacement will provide once the failure confirmed caused or our product quality; Not satisfied with a refund. For more information, please contact: RDS Drilling Rig. WhatsApp: +91 7600898210 Email: rdsdrillingrig@gmail.com Website: https://www.rdsrig.com

RDS Engineering Manufacturing Impregnated TC Tungsten Carbide core bits for Core Drilling, Tunnel Drilling, Geotechnical Investigation, Soil Testing, Drainage, and Grouting of Holes, among other uses. A TC Tungsten Carbide Core Bit is a specialized drilling tool used for coring or drilling holes in various materials, such as concrete, masonry, and other hard surfaces. The core bit is typically composed of a steel body with Tungsten Carbide or a Tungsten Carbide tip. Tungsten Carbide on the core bit provides the cutting action and makes it suitable for drilling through tough materials. TC Tungsten Carbide core bits are commonly used in the construction, mining, geotechnical investigation, and geological exploration industries. They are designed to be used with specific drilling machines, including hand-held and rig-based coring machines. The kind of material being drilled, the strength of the drilling tool, and the intended drilling speed are all variables that must be taken into consideration when choosing a TC Tungsten Carbide core bit. NMLC triple tube TC Tungsten Carbide Core bit size core diameter of 48 mm and a Drilling hole diameter of 76 mm. TC Fada Tungsten Carbide Core bit TC compression Tungsten Carbide Core bit FAQ Terms and Conditions of Ordering: Quality warranty: Our products are made of high-quality steel, and all spare parts are inspected strictly before shipping. We have quickly responded to your complaint and suggestion. Production time: Generally, you need 2 days Transportation: By air, By express, or by sea, according to your requests. 1. Methods of Payment: RTGST, NEFT, IMPS, CASH, Online 2. Handling time for an order Based on order quantity, it normally takes 2 days for production. in 3 working days after receiving the advance payment 3. Shipping way Sample order: we suggest Courier express like DHL, UPS, TNT/FEDEX or by air Bulk order: we suggest by air or by sea. 4. Quality Control We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 5. After Services: a. Our sales team will respond to your question within 24 hours (Holidays Excluded) b. Technical Support will be available in any time 6. Quality and Service: A. There will be strict inspection and testing for every order before shipping out. B. Our sales team and Technical Support will respond to your question within 24 hours through WhatsApp +91 7600898210 C. A free replacement will be provided once the failure is confirmed to be caused by our product quality or if you are not satisfied with a refund. For more information, please contact: RDS Drilling Rig WhatsApp: +91 7600898210 Email: rdsdrillingrig@gmail.com

RDS Engineering Manufacturing Impregnated TC Tungsten Carbide core bits for Core Drilling, Tunnel Drilling, Geotechnical Investigation, Soil Testing, Drainage, and Grouting of Holes, among other uses. A TC Tungsten Carbide Core Bit is a specialized drilling tool used for coring or drilling holes in various materials, such as concrete, masonry, and other hard surfaces. The core bit is typically composed of a steel body with Tungsten Carbide or a Tungsten Carbide tip. Tungsten Carbide on the core bit provides the cutting action and makes it suitable for drilling through tough materials. TC Tungsten Carbide core bits are commonly used in the construction, mining, geotechnical investigation, and geological exploration industries. They are designed to be used with specific drilling machines, including hand-held and rig-based coring machines. The kind of material being drilled, the strength of the drilling tool, and the intended drilling speed are all variables that must be taken into consideration when choosing a TC Tungsten Carbide core bit. Nx TC Tungsten Carbide Core bit size core diameter of 54 mm and a Drilling hole diameter of 76 mm. TC Fada Tungsten Carbide Core bit TC compression Tungsten Carbide Core bit FAQ Terms and Conditions of Ordering: Quality warranty: Our products are made of high-quality steel, and all spare parts are inspected strictly before shipping. We have quickly responded to your complaint and suggestion. Production time: Generally, you need 2 days Transportation: By air, By express, or by sea, according to your requests. 1. Methods of Payment: RTGST, NEFT, IMPS, CASH, Online 2. Handling time for an order Based on order quantity, it normally takes 2 days for production. in 3 working days after receiving the advance payment 3. Shipping way Sample order: we suggest Courier express like DHL, UPS, TNT/FEDEX or by air Bulk order: we suggest by air or by sea. 4. Quality Control We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 5. After Services: a. Our sales team will respond to your question within 24 hours (Holidays Excluded) b. Technical Support will be available in any time 6. Quality and Service: A. There will be strict inspection and testing for every order before shipping out. B. Our sales team and Technical Support will respond to your question within 24 hours through WhatsApp +91 7600898210 C. A free replacement will be provided once the failure is confirmed to be caused by our product quality or if you are not satisfied with a refund. For more information, please contact: RDS Drilling Rig WhatsApp: +91 7600898210 Email: rdsdrillingrig@gmail.com

RDS Engineering Manufacturing Impregnated diamond core bits for Diamond Core Drilling, Tunnel Drilling, Geotechnical Investigation, Soil Testing, Drainage, and Grouting of Holes, among other uses. Diamond core bits are commonly used in the construction, mining, geotechnical investigation, and geological exploration industries. They are designed to be used with specific drilling machines, including hand-held and rig-based coring machines. A diamond core bit is a specialized drilling tool used for coring or drilling holes in various materials, such as concrete, masonry, and other hard surfaces. The core bit is typically composed of a steel body with diamond-impregnated segments or a diamond-encrusted tip. The diamonds on the core bit provide the cutting action and make it suitable for drilling through tough materials. The kind of material being drilled, the strength of the drilling tool, and the intended drilling speed are all variables that must be taken into consideration when choosing a diamond core bit. Diamond core bit for NMLC triple tube size core diameter of 48 mm and a Drilling hole diameter of 76 mm. 55 carat Diamond Core bit NMLC triple tube 70 carat Diamond Core bit NMLC triple tube FAQ Terms and Conditions of Ordering: Quality warranty: Our products are made of high-quality steel, and all spare parts are inspected strictly before shipping. We have quickly responded to your complaint and suggestion. Production time: Generally, you need 2 days Transportation: By air, By express, or by sea, according to your requests. 1. Methods of Payment: RTGST, NEFT, IMPS, CASH, Online 2. Handling time for an order Based on order quantity, it normally takes 2 days for production. in 3 working days after receiving the advance payment 3. Shipping way Sample order: we suggest Courier express like DHL, UPS, TNT/FEDEX or by air Bulk order: we suggest by air or by sea. 4. Quality Control We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 5. After Services: a. Our sales team will respond to your question within 24 hours (Holidays Excluded) b. Technical Support will be available in any time 6. Quality and Service: A. There will be strict inspection and testing for every order before shipping out. B. Our sales team and Technical Support will respond to your question within 24 hours through WhatsApp +91 7600898210 C. A free replacement will be provided once the failure is confirmed to be caused by our product quality or if you are not satisfied with a refund. For more information, please contact: RDS Drilling Rig WhatsApp: +91 7600898210 Email: rdsdrillingrig@gmail.com

RDS Engineering Manufacturing Impregnated diamond core bits for Diamond Core Drilling, Tunnel Drilling, Geotechnical Investigation, Soil Testing, Drainage, and Grouting of Holes, among other uses. A diamond core bit is a specialized drilling tool used for coring or drilling holes in various materials, such as concrete, masonry, and other hard surfaces. The core bit is typically composed of a steel body with diamond-impregnated segments or a diamond-encrusted tip. The diamonds on the core bit provide the cutting action and make it suitable for drilling through tough materials. Diamond core bits are commonly used in the construction, mining, geotechnical investigation, and geological exploration industries. They are designed to be used with specific drilling machines, including hand-held and rig-based coring machines. The kind of material being drilled, the strength of the drilling tool, and the intended drilling speed are all variables that must be taken into consideration when choosing a diamond core bit. Nx Diamond Core bit size core diameter of 54 mm and a Drilling hole diameter of 76 mm. 55 carat Diamond Core bit 70 carat Diamond Core bit FAQ Terms and Conditions of Ordering: Quality warranty: Our products are made of high-quality steel, and all spare parts are inspected strictly before shipping. We have quickly responded to your complaint and suggestion. Production time: Generally, you need 2 days Transportation: By air, By express, or by sea, according to your requests. 1. Methods of Payment: RTGST, NEFT, IMPS, CASH, Online 2. Handling time for an order Based on order quantity, it normally takes 2 days for production. in 3 working days after receiving the advance payment 3. Shipping way Sample order: we suggest Courier express like DHL, UPS, TNT/FEDEX or by air Bulk order: we suggest by air or by sea. 4. Quality Control We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 5. After Services: a. Our sales team will respond to your question within 24 hours (Holidays Excluded) b. Technical Support will be available in any time 6. Quality and Service: A. There will be strict inspection and testing for every order before shipping out. B. Our sales team and Technical Support will respond to your question within 24 hours through WhatsApp +91 7600898210 C. A free replacement will be provided once the failure is confirmed to be caused by our product quality or if you are not satisfied with a refund. For more information, please contact: RDS Drilling Rig WhatsApp: +91 7600898210 Email: rdsdrillingrig@gmail.com

Equipment for undisturbed soil samples These sampling tubes can be used to gather undisturbed soil samples at various depths. All the tools needed for boring are included in the kit. collection and wax sealing. The procedure can be performed with or without a tripod support. The tools are included in a canvas bag. Models: 150mm, 200mm, 225mm, or 300mm in length, respectively. 1 meter long and 5 times 37.5 mm in diameter. Large jarring link for driving samplers with a 50mm, 100mm, or 150mm diameter. This can be attached to the extension rod or the sampler. The carrying case contains one eye hook, one wax container, one methylated spirit stove, one wax ladle, and one set of spanners. A 150-mm auger blade type, equipped with a T-shaped handle and a single, one-meter-long rod. Accessories: Samplers of various sizes are available for undisturbed sampling. These are used by sample equipment. Each 45-cm-long sampler comes with two end caps and a cutting nose. driving head with three air outlet valves. C-spanners Samplers come in 50mm, 100mm, and 150mm dia. Additionally, 50-mm, 75-mm, and 100-mm-diameter thin-walled samplers are readily accessible. Each sampler measures 60 centimeters in length and has a reinforced cutting edge. By employing the proper adaptors, these samplers can be utilized with sampling equipment, such as a" drill rod FAQ Terms & Conditions of Ordering: Quality warranty: Our products are made of high-quality steel and all spares’ parts are inspected strictly before shipping. We have quickly responses for your complaint and suggestion. Production time: Generally need 2 days Transportation: By air, By Express or by sea according to your requests. 1. Methods of Payment: RTGST, NEFT, IMPS, CASH, Online 2. Handling time for an order Based on order quantity, normally it takes 2 days for production. in 3 working days after receiving the advance payment 3. Shipping way Sample order: we suggest Courier express like DHL/UPS/TNT/FEDEX or by air Bulk order: we suggest by air or by sea. 4. Quality Control We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 5. After Services: a. Our sales team will response for your question within 24 hours (Holidays Excluded) b. Technical Support will be available in any time 6. Quality & Service: A. There will be strict inspection and testing for every order before shipping out. B. Our sales team and Technical Support will response for your question within 24 hours through WhatsApp +91 7600898210 C. Free replacement will provide once the failure confirmed caused or our product quality; Not satisfied with a refund. For more information, please contact: RDS Drilling Rig. WhatsApp: +91 7600898210 Email: rdsdrillingrig@gmail.com